Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:272
The stainless steel checker plate uses the gravity of the machine to punch holes of different shapes and sizes on the stainless steel surface. Herringbone flower, small oval, millet flower, five-needle flower, round convex hole, button convex hole, etc.
stainless steel checker plate has the following performance characteristics:
1. Anti-slip, long use time;
2. Fire-proof and moisture-proof, easy to scrub and clean;
3. The follow-up process can be used for color plating and no fingerprints.
4. Easy to process, can be bent 90 degrees, can be punched
T.S.(Mpa) ≥ 640
Y.S.(Mpa) ≥ 500
E.L.(%) ≥ 40
Material: 304 304L 316 316L 201 430 310 321
Width: 1000mm, 1219mm,1500mm
Surface: NO.1、1D、2D、2B、N0.4、HL、BA、8K Mirror
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
Stainless steel checker plate because of its anti-skid performance, can be used in hotels, KTV decoration, chemical industry, subway floors, electrical products, LED chassis lamps, food equipment, elevator floor skid plates, staircase buildings, medical equipment, automotive component panels, etc
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....
Steel is harder than iron and due to the mixture of iron and carbon, they make the perfect combination to create steel, depending on the amount of carbon, the hardness you obtain and its use is differ...