Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:59
409 409L stainless steel sheets and plate have a strong resistance to corrosion, high temperature, and fatigue, which can realize the life and lightweight of exhaust system components.
409 409L stainless steel sheets and plate has low cost, good flexibility, high yield, and easy replacement. It is a new environmentally friendly product. Normal temperature processing, that is, easy plastic processing, because it does not need a surface treatment, it is simple, simple to maintain, clean, high finish, good welding performance, quality characteristics, quality characteristics of stainless steel, beautiful surface, and diversified use possibilities, good corrosion resistance, It is more durable than ordinary steel and has good corrosion resistance and high strength, so the possibility of using thin plates is high, high-temperature oxidation resistance and high strength, so it can resist fire.
T.S.(Mpa) ≥ 515
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 40
Width: 1000mm, 1219mm ,1250mm,1500mm,1800mm;
Thickness: 0.3—30mm(hot rolled);
Surface: No.2B, BA(Bright and Anneal), 8K mirror, HL
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
409L stainless steel sheets and plate control the content of C and N in the steel, so it has excellent weldability, formability, and corrosion resistance; it contains 11% Cr, and is ferritic stainless steel with BCC structure at high and normal temperatures; due to the addition of Ti element, it is High-temperature corrosion resistance and high-temperature strength are better. Below 750℃, there is vacant oxidation and corrosion resistance. Used in automobile exhaust pipes, heat exchangers, containers, and other products that are not heat-treated after welding.
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....