Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:50
321 stainless steel sheets and plates are used in applications up to a temperature range of about 900°C. It combines high strength, anti-oxidation and peeling, and subsequent phase stability against corrosion by aqueous solutions.
Ti in 321 stainless steel plate exists as a stabilizing element, but it is also hot-strength steel, which is much better than the 316L stainless steel plate in terms of high temperature.321 stainless steel plate is in organic acid and inorganic acid of different concentrations and different temperatures, especially It has good abrasion resistance in oxidizing media and is used to manufacture the lining and conveying pipeline of wear-resistant acid containers and wear-resistant equipment.
The 321 stainless steel plate is a Ni-Cr-Mo austenitic stainless steel plate. Its performance is very similar to that of the 304 stainless steel plate. However, due to the addition of metallic titanium, it has better resistance to grain boundary corrosion and high-temperature strength. Due to the addition of titanium, it effectively controls the formation of chromium carbide.
T.S.(Mpa) ≥ 515
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 40
Width: 1000mm, 1219mm ,1250mm,1500mm,1800mm;
Thickness: 0.3—30mm(hot rolled);
Surface: No.2B, BA(Bright and Anneal), 8K mirror, HL
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
321 stainless steel has excellent high-temperature stress rupture (Stress Rupture) performance and high-temperature creep resistance (Creep Resistance) stress mechanical properties are better than 304 stainless steel plate. 321 stainless steel sheet and plate can be used in petroleum exhaust gas combustion pipes, engine exhaust pipes, boiler shells, heat exchangers, heating furnace parts, boiler pressure vessels, chemical transport vehicles.
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....