Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:66
316 316L stainless steel sheets and plate is a stainless steel containing molybdenum. Because the steel contains molybdenum, the overall performance of this steel is better than 310 and 304 stainless steel. Under high-temperature conditions, when the concentration of sulfuric acid is lower than 15% or higher than 85%, 316L stainless steel has a wide range of use. 316L stainless steel also has good resistance to chloride corrosion, so it is usually used in marine environments.
316L stainless steel has a carbon content of 0.03, which can be used in applications that cannot be annealed after welding and require high corrosion resistance.
The corrosion resistance is better than 304 stainless steel, and it has good corrosion resistance in the production process of pulp and paper. And 316L stainless steel is also resistant to the erosion of the ocean and corrosive industrial atmosphere.
In intermittent use below 1600 degrees and continuous use below 700 degrees, 316L stainless steel has good oxidation resistance. In the range of 800-1575 degrees, *do not act continuously. 316L stainless steel, but when 316L stainless steel is used continuously outside this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better resistance to carbide precipitation than 316 stainless steel, and the above temperature range can be used.
T.S.(Mpa) ≥ 485
Y.S.(Mpa) ≥ 170
E.L.(%) ≥ 30
Width: 1000mm, 1220mm ,1250mm,1500mm,1800mm;
Thickness: 0.8—3.0mm(cold rolled),3.0-12mm(hot rolled);
Surface: No.2B, BA(Bright and Anneal), 8K mirror, HL
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
Our 316 316L stainless steel sheets can be used in pulp and paper equipment, heat exchangers, materials for exterior buildings in coastal areas, photography, food industry, coastal facilities
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...