Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:58
310S is a kind of stainless steel with good high-temperature resistance. It is widely used to make equipment and parts that require good comprehensive performance (corrosion resistance and high-temperature resistance). To maintain the inherent corrosion resistance and high-temperature resistance of stainless steel, steel must contain more than 24% chromium and more than 19% nickel. 310s stainless steel is a grade of stainless steel produced by the American ASTM standard.
Because the two elements of nickel and chromium are added to the 310s stainless steel plate, it has excellent oxidation resistance and corrosion resistance. At the same time, it also needs excellent high-temperature resistance. At very high temperatures, the 310s stainless steel plate can also be normal work.
310s stainless steel plate has a stable molecular structure, so it has relatively high strength and variable strength under high-temperature conditions. It can be concluded that the 310s stainless steel plate has a higher boiling point, which can reach 1200 ℃, so the temperature is The impact is relatively small.
310s stainless steel plate has strong environmental adaptability and can work normally even in special environments, so it is also widely used in factories that work at high temperatures.
310s stainless steel plate does not have any magnetism in the solid solution state, and also has excellent weldability.
T.S.(Mpa) ≥ 515
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 35
Width: 1000mm, 1220mm ,1250mm,1500mm,1800mm;
Thickness: 0.8—3.0mm(cold rolled),3.0-12mm(hot rolled);
Surface: No.2B, BA, 8K mirror, HL
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
310S steel plate is a kind of stainless steel commonly used in industry, and it is also called 2520 stainless steel plate in the industry. Its corrosion resistance is better than 304 stainless steel, but the price is cheaper than 904L stainless steel, so it is widely used in high-heat/high-temperature contact parts, such as exhaust pipes, heat treatment furnaces, heat exchangers, incinerators, etc.
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....