Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:48
309S stainless steel sheets and plate is a variant of 309 stainless steel with lower carbon content, used in places where welding is required. The low carbon content minimizes the precipitation of carbides in the heat-affected zone near the weld
309S stainless steel sheets and the plate have a smooth surface, high plasticity, toughness, and mechanical strength, resistance to corrosion by acids, alkaline gases, solutions, and other media. 23Cr-13Ni high alloy steel stainless steel, excellent corrosion resistance, and strength, suitable for parts with a working temperature of 1000℃, has excellent high-temperature acid resistance and high-temperature strength
T.S.(Mpa) ≥ 520
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 40
Width: 1000mm, 1220mm ,1250mm,1500mm,1800mm,2000mm;
Surface: No.1, No.2B, No.2D, BA, 8K Mirror, Hairline brushed;
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
309S stainless steel sheets and plate used in exhaust equipment, heat treatment furnace, and heat exchanger, and can used in machinery, construction, etc.
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....