Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:116
304L stainless steel sheets and plate is versatile stainless steel, which is widely used to make equipment and parts that require good comprehensive performance (corrosion resistance and formability). The development of 304L stainless steel has made 304L stainless steel's corrosion resistance, appearance, workability, strength, and other characteristics far exceed other materials
304L stainless steel has an alloy that is resistant to weak corrosive media such as air, steam, water, and acid, alkali, salt, and other chemically aggressive media. The carbon content is below 0.03%, which is ultra-low carbon stainless steel, and the lower the carbon content, the better the corrosion resistance. In the case of no heat treatment, good corrosion resistance can be maintained, and the operating temperature is -196℃～800℃.
T.S.(Mpa) ≥ 520
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 40
Width: 1000mm, 1219mm ,1500mm,1800mm;
Thickness: 0.5—4.0mm(cold rolled),4.5-35mm(hot rolled);
Surface: No.1, No.2B, BA, 8K mirror brushed, HL, No.4
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
Type 304L stainless steel sheets and plate (low carbon), good resistance to nitric acid, and durable medium temperature and concentration of sulfuric acid, widely used as liquid gas storage tanks. 304L stainless steel is often used in outdoor machines in the chemical, coal, and petroleum industries that require high grain boundary corrosion resistance, heat-resistant parts of building materials, and parts with difficult heat treatment.
Classification of black steel plate: 1. Non-alloy steel: Non-alloy steel is divided into carbon structural steel, high-quality carbon steel, carbon tool steel, free-cutting structural st...
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
On August 25, the Shulang Lake Grinding Center in Zhoushan City, Zhejiang Province, established by Vale and Ningbo Zhoushan Port Group, was completed and put into operation. This is Vale’s first...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...