Stainless steel sheet and plate Stainless steel coil Stainless steel strip Stainless steel decorative sheet
Contact Us

    Stainless Steel Supplier Corporation Limited

    Tel : +86 13818440015

    Tel : 021-54725826

    Email :

    Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai

304 stainless steel sheets and plate

Add Time:2021-01-07 Hits:147

  • 304 stainless steel sheets and plate
  • 304 stainless steel sheets and plate
  • 304 stainless steel sheets and plate
  • 304 stainless steel sheets and plate
  • 304 stainless steel sheets and plate

304 stainless steel sheets and plate

304 stainless steel plate has a beautiful surface and diversified use possibilities. Good corrosion resistance, longer durability than ordinary steel, and higher strength, so thin plates are more likely to be used. 304 stainless steel plate and sheets have high-temperature oxidation resistance and high strength, so it can resist fire, normal temperature processing, that is, easy plastic processing Clean, high finish, simple maintenance, good welding performance.

Product Introduction

304 stainless steel sheets and plate has four advantages:

1) dry grinding and wire drawing

Because of the low cost, simple operation, low processing cost, and wide application of this kind of processing equipment, it has become necessary equipment for processing centers. Therefore, most machining centers can provide frosted sheets of filament and short filament, of which 304 steel accounts for more than 80%.

2) oil polish drawing

304 series stainless steel after oil grinding shows the perfect decorative effect, which is widely used in elevators, home appliances, and other decorative panels. Cold-rolled 304 series stainless steel can generally achieve good results after one frosting pass. At present, some processing centers on the market can provide oily frosting of hot-rolled stainless steel, and its effect is comparable to cold-rolled oil grinding.

Oily drawing is also divided into filament and short filament. Elevator decoration generally uses a filament, and there are two types of lines such as various small appliances and kitchen utensils.

3) 8K processing

304 series stainless steel is obviously better than 200 series stainless steel in 8K processing. The 2B cold-rolled surface is polished by 8K, and the mirror effect is generally achieved after one pass of processing.

4) Titanium

The choice of high-end decoration materials has a gorgeous effect. 304 series stainless steel has been used in titanium decoration for a long time and is widely used in elevators and building decoration materials.

Chemical composition (WT%)

C: ≤0.08

Si: ≤1.0


Cr: 18.0~20.0

Ni: 8.0-10.5

S: ≤0.03

P: ≤0.035

N: ≤0.1

Physical properties

T.S.(Mpa) ≥ 520

Y.S.(Mpa) ≥ 205

E.L.(%)    ≥ 40

Hv      ≤200

Specification information

Width: 1000mm, 1220mm,1250mm,1500mm,1800mm,2000mm;

Thickness: 0.3—6.0mm(cold rolled),3.0-14mm(hot rolled);


Surface: 2B, BA, 8K mirror, Hairline, No.4 brushed, snow sand, stainless steel without fingerprint board;

Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), 3D three-dimensional plates, sandblasted plates, embossed plates.


We serve 304 stainless steel sheets and plate widely used in household products (category 1, 2 tableware), cabinets, indoor pipelines, water heaters, boilers, bathtubs, auto parts, medical appliances, building materials, chemicals, food industry, agriculture, and ship parts


Huaxia international Steel Corporation limted - Copyright © 2020 ALL rights reserved Privacy Policy
leave your message