Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:52
Among the stainless steels, 301 stainless steel is the most easily strengthened by cold deformation. Cold deformation can increase the strength and hardness of the steel and retain sufficient plasticity and toughness. Also, this steel has good rust resistance under atmospheric conditions.
301 stainless steel sheets and plate mainly used in a cold working state to withstand higher loads, and hope to reduce equipment weight and rust-free equipment parts. Also, this steel is prone to work hardening when impacted by external forces, which can absorb more impact energy, which will provide more reliable safety guarantees for equipment and personnel.
301 is prone to work hardening during deformation and is used in places requiring higher strength.
T.S.(Mpa) ≥ 520
Y.S.(Mpa) ≥ 205
E.L.(%) ≥ 40
Width: 1000mm, 1219mm;
Surface: 2B glossy, BA,8K mirror, brushed, frosted, snow sand, stainless steel without fingerprint board;
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), 3D three-dimensional plates, sandblasted plates, embossed plates.
We serve petroleum, chemical industry, smelting, water conservancy, electric power, medical machinery, papermaking, heat preservation, refrigeration, machinery and equipment, food, construction, aviation, shipbuilding, subsea engineering, and 301 stainless steel sheet and plate can use to produce environmental protection, boiler heat exchanger and other industries
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...
Ferritic stainless steel is also magnetic. Although the carbon content is lower than martensite, they become part of austenite at high temperatures, so they will precipitate martensite during cooling....