Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:108
2205 stainless steel sheets and plate is duplex stainless steel composed of 21% chromium, 2.5% molybdenum, and 4.5% nickel nitrogen alloy. It has high strength, good impact toughness, and good overall and local stress corrosion resistance.
2205 stainless steel sheets and plate Sufficient plasticity. The wall thickness of storage tanks or pressure vessels made of duplex stainless steel is 30-50% less than that of commonly used austenite, which is beneficial to reduce costs. Thermal conductivity is better than austenite, thermal expansion coefficient is smaller than austenite by bai, heat fatigue resistance, added stabilizing element titanium, mechanical properties of the weld.
2205 stainless steel sheets and plates have excellent resistance to stress corrosion cracking. Even duplex stainless steels with low alloy content have a higher resistance to stress corrosion cracking than austenitic stainless steels, especially in environments containing chloride ions. Stress corrosion is a prominent problem that is difficult to solve for ordinary austenitic stainless steel.
The corrosion resistance of 2205 duplex stainless steel, which is commonly used in many media, is better than that of ordinary 316L austenitic stainless steel, while super duplex stainless steel has extremely high corrosion resistance. In some media, such as acetic acid, formic acid, etc. It can replace high-alloy austenitic stainless steels and even corrosion-resistant alloys.
It has good local corrosion resistance. Compared with austenitic stainless steel with the same alloy content, its wear corrosion resistance and fatigue corrosion resistance are better than austenitic stainless steel.
The linear expansion coefficient of austenitic stainless steel is lower than that of carbon steel. It is suitable for connection with carbon steel and has important engineering significance, such as the production of composite plates or linings.
T.S.(Mpa) ≥ 620
Y.S.(Mpa) ≥ 450
E.L.(%) ≥ 18
Width: 1000mm, 1219mm ,1250mm,1500mm,1800mm;
Thickness: 0.3—30mm(hot rolled);
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
2205 stainless steel sheets and plate can be used in Cargo oil tanks, couplings, diaphragm seals, fasteners, heat exchangers, hubs, exterior pipes, pipe fittings, pressure rollers, pressure vessels, screw conveyors, shafts, valve parts.
Classification of black steel plate: 1. Non-alloy steel: Non-alloy steel is divided into carbon structural steel, high-quality carbon steel, carbon tool steel, free-cutting structural st...
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
On August 25, the Shulang Lake Grinding Center in Zhoushan City, Zhejiang Province, established by Vale and Ningbo Zhoushan Port Group, was completed and put into operation. This is Vale’s first...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...