Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:55
201 stainless steel has the characteristics of polishing, no bubbles, no pinholes, etc. It is used to produce high-quality materials for various watch cases and watchband back covers.
201 stainless steel sheets and plates mainly used for decorative pipes, industrial pipes, and some shallow-drawn products. 201 stainless steel plate has the ability to resist general corrosion similar to the unstable nickel-chromium alloy 304. Long-term heating of 201 stainless steel plate in the temperature range of chromium carbide may affect the alloy 321 stainless steel plate and 347 in harsh corrosive media. 201 stainless steel plate is mainly used for high-temperature applications. High-temperature applications require the material to have strong sensitization resistance to prevent intergranular corrosion at lower temperatures.
(C) Carbon: ≤0.15
(Si) Silicon: ≤0.75
(Mn) Manganese: 5.5～7.50
(Cr) Chromium: 16.0～18.0
(N) Nitrogen: ≤0.25
(Ni) Nickel: 3.50～5.50
(P) Phosphorus: ≤0.060
(S) Sulfur: ≤0.030
Tensile strength: 100,000 to 180,000 psi
Yield strength: 50,000 to 150,000 psi
Density: .280lbs/cubic inch (density 7.93g/cm3)
Width: 1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm;
Thickness: cold rolled 2B (0.1—6.0mm)
Surface: 2B glossy, BA; 8K mirror; brushed, frosted; snow sand; stainless steel without fingerprint board;
Decorative panels: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), 3D three-dimensional plates, sandblasted plates, embossed plates. Hot rolled section: stainless steel plate hot rolled No.1 (coil Board, flat board);
201 stainless steel sheets and plate is applied to the outdoor machines in the chemical, coal, and petroleum industries that require high grain boundary corrosion resistance, heat-resistant parts for building materials, and parts with difficult heat treatment.
Because 201 stainless steel plate is cheap and can withstand high temperature and corrosion, it can be used as engine exhaust pipe, boiler shell, heat exchanger, heating furnace parts, and oil-exporting countries generally use 201 stainless steel plate as oil exhaust gas combustion pipe
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...