Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:57
Common mirror stainless steel grades are divided into three types: 8K, 10K, and 12K. Generally, it is ordinary polishing, ordinary 8K, fine grinding 10K, super fine grinding 12K or above. Generally, there is not much difference between the same thickness, the 12K mirror is brighter; the higher the mirror requirements, the higher the processing cost. In some areas, the grades are generally divided into 6K, 8K, 10K, 6K for normal grinding, 8K for fine grinding, and 10K for super fine grinding.
The principle of making mirror stainless steel is that the grinding fluid for stainless steel raw materials is polished on the steel surface through polishing equipment so that the surface of the plate is flat and the brightness is as clear and bright as a mirror. The process of processing mirror stainless steel plate can be divided into two ways: machine grinding and manual grinding, and this must be judged by looking at the brightness of the mirror surface, and the blisters and grinding heads on the surface of the plate must be less.
T.S.(Mpa) ≥ 568
Y.S.(Mpa) ≥ 216
Material: 200,300,400 series
Length:2000mm,2440mm,3000mm,6000mm or customized size
Width: 1000mm,1219mm,1250mm or customized size
Surface: No.8 Mirror
Decorative sheet and plate: color plates, etching plates, sandblasted plates, embossed plates、PVD Coating
At present, mirror stainless steel is mainly used in stainless steel mirrors, solar energy, IT electronics, signs and nameplates, etching LOGO, sanitary ware, home appliances, lighting, catering kitchen utensils, appliances, equipment, auto parts, mobile phone accessories, elevator decoration, architectural decoration, and other fields.
Classification of black steel plate: 1. Non-alloy steel: Non-alloy steel is divided into carbon structural steel, high-quality carbon steel, carbon tool steel, free-cutting structural st...
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
On August 25, the Shulang Lake Grinding Center in Zhoushan City, Zhejiang Province, established by Vale and Ningbo Zhoushan Port Group, was completed and put into operation. This is Vale’s first...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...