Products
Stainless steel sheet and plate Stainless steel coil Stainless steel strip Stainless steel decorative sheet
Contact Us

    Stainless Steel Supplier Corporation Limited

    Tel : +86 13818440015

    Tel : 021-54725826

    Email : export88@huaxia-intl.com

    Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai

NO.4 stainless steel sheets

Add Time:2021-01-07 Hits:23

  • NO.4 stainless steel sheets
  • NO.4 stainless steel sheets
  • NO.4 stainless steel sheets
  • NO.4 stainless steel sheets
Description

No.4 stainless steel sheets

No. 4 surface of the stainless steel sheet and the strip is a unidirectional surface processing, and the reflectivity of this surface is not strong. This processing surface is the most widely used in the construction field. The surface process step is to use coarse abrasives for polishing, and then use abrasives with a particle size of 180 for grinding.

Product Description

In many fields, such as elevator decoration, kitchen equipment, architectural decoration, stainless steel sheet is used for decoration. Stainless steel sheet has good durability and gorgeous decorative effect. However, because the surface of the stainless steel sheet is very smooth, it produces a mirror effect, which is difficult if the surface is stained. Wipe clean, so in recent years, a matt wire drawing process has been developed on the smooth surface of the stainless steel sheet. When the stainless steel sheet is processed for matte wire drawing, the oil drawing method is used to perform surface matte wire drawing on the surface of the stainless steel sheet After processing, the surface of the processed stainless steel sheet is matt and has a brushed surface, dirt is not easy to get on, and it is very easy to wipe clean.

Chemical composition (WT%)

C: ≤0.08

Si: ≤1.0

Mn: ≤2.0

Cr: 17.0~19.0

S: ≤0.03

P: ≤0.035

Ni: 8.0~10.0

Physical properties

T.S.(Mpa) ≥ 568

Y.S.(Mpa) ≥ 216

EL(%)     ≥40

HV: 150~480

Specification information

Material: 200,300,400 series

Length:2000mm,2440mm,3000mm,6000mm or customized size

Width: 1000mm,1219mm,1250mm or customized size

Thickness: 0.3mm~6.0mm

Surface: HL(hair line) Brushed、No.4、No.8 Mirror

Decorative sheet and plate: color plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates、PVD Coating

Application

Oily drawing is also divided into filament and short filament. Elevator decoration generally uses a filament, and there are two types of lines such as various small appliances and kitchen utensils.

 


Recommend
Huaxia international Steel Corporation limted - Copyright © 2020 ALL rights reserved Privacy Policy
leave your message