Products
Stainless steel sheet and plate Stainless steel coil Stainless steel strip Stainless steel decorative sheet
Contact Us

    Stainless Steel Supplier Corporation Limited

    Tel : +86 13818440015

    Tel : 021-54725826

    Email : export88@huaxia-intl.com

    Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai

410 410s stainless steel coil

Add Time:2021-01-07 Hits:97

  • 410 410s stainless steel coil
  • 410 410s stainless steel coil
  • 410 410s stainless steel coil
  • 410 410s stainless steel coil
Description

410 410S stainless steel coil

410 stainless steel is a basic general-purpose martensitic stainless steel used for high-stress components. It has good corrosion resistance, high strength, and high hardness. Alloy 410 contains at least 11.5% chromium, which is sufficient to prove the corrosion resistance in mild atmosphere, steam, and many mild chemical environments. This is a general-purpose grade, usually supplied under hardened but still machinable conditions for applications requiring high strength and moderate heat resistance and corrosion resistance. After hardening, tempering, and polishing, Alloy 410 shows the greatest corrosion resistance.

Product Introduction

410 is a non-nickel-free stainless steel material, which can also be called stainless iron. It needs to be annealed before processing standard parts of this material.

The advantages of 410 stainless steel are large thermal conductivity, small expansion coefficient, good oxidation resistance, and excellent stress corrosion resistance. The application of external refining technology (AOD or VOD) can greatly reduce interstitial elements such as carbon and nitrogen.

410S stainless steel: the representative steel grade of martensite. Because it does not contain Ni, it has the advantages of low cost and stable price; it has higher strength and good workability than steel grades, but it is not suitable for use in harsh corrosive environments; higher hardness (magnetic) can be obtained after heat treatment.

Chemical composition (WT%)

C: ≤0.15

Si: ≤1.0

Mn: ≤1.0

Cr: 11.5~13.5

S: ≤0.03

P: ≤0.035

Physical properties

T.S.(Mpa) ≥ 360

Y.S.(Mpa) ≥ 195

EL(%)     ≥22

HB:      ≤183

Specification information

Material: 410 410S

Width: 1000mm, 1220mm,1250mm,1500mm etc

Thickness: 0.1mm—6.0mm

Surface: NO.1、2B、BA、N0.4、HL、8K Mirror

Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.

Application

410 stainless steel is relatively lighter because of its high strength, especially after being impacted, it absorbs energy lighter than other metal materials and has good safety performance. It is a key material used in the automobile transportation industry.

410S stainless steel has high strength and hardness, it is widely used in the manufacture of kitchen utensils, knives, and some mechanical parts.

 


Recommend
Huaxia international Steel Corporation limted - Copyright © 2020 ALL rights reserved Privacy Policy
leave your message