Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:58
Both 316 and 316L stainless steels are molybdenum-containing stainless steels. Among them, the molybdenum content in 316L stainless steel is slightly higher than that in 316 stainless steel. Because the composition of this type of stainless steel contains alloying element molybdenum, the overall performance of this type of steel is stronger than that of 310 and 304 stainless steel. In high-temperature conditions, whenever the concentration of sulfuric acid is lower than 15% or higher than 85%, use 316 Stainless steel is more suitable. 316 stainless steel also has better resistance to chloride corrosion, so 316 stainless steel is generally used in marine environments.
The large carbon content of 316L stainless steel is 0.03%, which can be used in applications where there is no need for annealing after welding and high corrosion resistance is required.
316 316L stainless steel has stronger corrosion resistance than 304 stainless steel. Therefore, 316 and 316L stainless steel are very useful in the paper industry. Also, the corrosion resistance of 316 stainless steel can even resist corrosion in the ocean and corrosive industrial atmosphere.
The second is heat resistance. 316 series stainless steel can be used intermittently in the range of less than 1600°C and continuous use in the range of less than 1700°C.
316 stainless steel also has good oxidation resistance. In the temperature range of 800-1575℃, it is better not to use 316 stainless steel for operations. However, when 316 stainless steel is used continuously outside this temperature range, this stainless steel will have Excellent heat resistance.
T.S.(Mpa) ≥ 520
Y.S.(Mpa) ≥ 205
Width: 1000mm, 1220mm,1250mm,1500mm etc
Surface: NO.1、2B、BA、N0.4、HL、8K Mirror
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
The classic application areas of 316 and 316L stainless steels are pulp and paper equipment heat exchangers, dyeing equipment, film washing equipment, pipelines, and exterior materials for buildings in coastal areas
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...