Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:52
310S stainless steel is an austenitic chromium-nickel stainless steel with good oxidation resistance and corrosion resistance. Because of the higher percentage of chromium and nickel, it has much better creep strength and can continue to work at high temperatures. It has good High-temperature resistance.
310S stainless steel and 310 stainless steel have these differences
1. Characteristics of stainless steel 310: high-temperature oxidation resistance, stainless steel has oxidation resistance through the local oxidation of chromium element. During the local oxidation of chromium elements, a very stable oxide (Cr2O3 chromium oxide) can be formed. ). As long as the chromium content of the metal is sufficient, a continuous layer of chromium oxide green can be formed on the metal surface to prevent the formation of other oxides and protect the metal.
2. The characteristics of stainless steel 310S: improve the fragile nature of carbon tool steel, and extend the life of the tool. Vacuum degassing refined steel with stable quality. Good hardenability, oil-cooled hardening (less quenching and deformation), good toughness and wear resistance, and durable tools.
T.S.(Mpa) ≥ 520
Y.S.(Mpa) ≥ 205
Width: 1000mm, 1220mm,1250mm,1500mm etc
Surface: NO.1、2B、BA、N0.4、HL、8K Mirror
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
310S stainless steel is mainly used in furnace materials, materials for automobile purification equipment, exhaust ducts, pipes, heat treatment furnaces, heat exchangers, incinerators, and other steels that require heat resistance, high heat/high-temperature contact parts
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...
In 2020, in response to the impact of the new crown pneumonia epidemic and changes in the international situation, global steel companies have made some strategic adjustments. On May 20th, ThyssenKrup...