Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : email@example.com
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:50
2507 duplex stainless steel contains 25% chromium, 4% molybdenum, and 7% nickel. It has strong strength and corrosion resistance, and its main application areas are chemical processing, petrochemical, and subsea equipment. At the same time, it has excellent resistance to chloride corrosion, high thermal conductivity, and low thermal expansion coefficient. Also, the high content of chromium, molybdenum, and nickel makes it resistant to pitting, crevice corrosion, and uniform corrosion.
The impact strength of 2507 duplex stainless steel is also very high. 2507 stainless steel should not be used for a long time at a temperature higher than 570°F, which will reduce the toughness of the stainless steel.
2507 duplex stainless steel has a high content of chromium and molybdenum, so it has better overall corrosion resistance to organic acids such as formic acid and acetic acid. At the same time, it also has strong corrosion resistance to inorganic acids containing chlorides.
316L stainless steel can’t be used in the hydrochloric acid environment, it may suffer local corrosion or overall corrosion. 2507 can be used in the diluted hydrochloric acid environment, with strong resistance to pitting and crevice corrosion.
T.S.(Mpa) ≥ 730
Y.S.(Mpa) ≥ 550
Width: 600mm,1000mm, 1220mm,1250mm,1500mm etc
Surface: NO.1、2B、BA、N0.4、HL、8K Mirror
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
2507 duplex stainless steel produced is widely used in:
1. Oil and gas industry equipment
2. heat exchangers, underwater equipment, fire equipment
3. Mechanical parts (high-strength, corrosion-resistant parts)
4. industrial scrubbing system
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...