Stainless Steel Supplier Corporation Limited
Tel : +86 13818440015
Tel : 021-54725826
Email : firstname.lastname@example.org
Address : Room 669, building 3, Wuxin Hefeng Plaza, 1388 Jiangyue Road, Pujiang Town, Minhang District, Shanghai
Add Time:2021-01-07 Hits:48
2205 duplex steel has better abrasion resistance in the seawater environment, and is more suitable for application in seawater corrosion and wear environment than 316L stainless steel.
2205 stainless steel increases the nitrogen content and enhances the stress corrosion resistance and pitting corrosion resistance in acidic media with high chloride ion concentration. Nitrogen is a strong austenite-forming element. When added to duplex stainless steel, it can not only increase the strength without significantly damaging the ductility of the stainless steel but also inhibit the precipitation of carbides.
The structural characteristics of 2205 duplex stainless steel are remarkable. In the greenhouse, austenite, and ferrite each account for about half of the steel solid solution, and both have the characteristics of the two-phase structure. It retains the characteristics of low thermal conductivity of ferritic stainless steel, resistance to pitting corrosion, crevices, and chloride stress corrosion, and also has austenitic stainless steel with good toughness, low brittle transition temperature, resistance to intergranular corrosion, mechanical properties, and welding performance.
T.S.(Mpa) ≥ 620
Y.S.(Mpa) ≥ 450
Width: 600mm,1000mm, 1220mm,1250mm,1500mm etc
Surface: NO.1、2B、BA、N0.4、HL、8K Mirror
Decorative sheet and plate: color plates, titanium-plated plates, etching plates, oil-polished hairline plates (HL, NO.4), sandblasted plates, embossed plates.
2205 duplex stainless steel produced is widely used in: pipelines for chemical industry, oil and gas industry, pulp and paper industry, fertilizer industry, seawater environment, energy and environmental protection industry, light industry and food industry, food and pharmaceutical industry equipment, High-strength structure.
According to the news at the end of November, the Korean Materials Research Institute (KIMS) Steel Materials Research Office under the Ministry of Science, Technology, Information and Communication an...
On March 10, the European Union issued the "New European Industrial Strategy", which clarified its vision for the future: to become a globally competitive and world-leading industry, pave the way for ...
On August 31, the world's first non-fossil-fuel-free sponge iron pilot test line-HYBRIT (Breakthrough Hydrogen Ironmaking Technology) project was put into production in Lulea, Sweden. The HYBRIT proje...
On July 14, Brazil local time, Vale opened another pilot plant in Minas Gerais. This is the second pilot plant for dry magnetic separation of fine ore that Vale started operating. It adopts FDMS techn...
Hydraulic test shall be carried out for the steel pipe bearing fluid pressure to check its pressure resistance capacity and quality. Under the specified pressure, it is qualified if there is no leakag...
Our main stainless steel products are recommended to you in detail1、 Stainless steel plate: thickness 0.3mm-180mm, width 900mm-2000mm 1 stainless steel belt (thickness 0.05-200 mm, width 9-2100mm, len...
According to the 2020 budget document issued by the British government on March 11, the total investment in infrastructure and construction projects in the UK will reach 640 billion pounds from 2024 t...
On October 15, the World Steel Association released the latest version of 2020 and 2021 short-term global steel demand forecasts. It is predicted that, affected by the new crown pneumonia epidemic, gl...